How to Replace the Replacement Key Battery For the saab key programming 9-3

Saab owners have to follow a series of special steps to install an additional ignition key. This requires the use of a handheld computer called Tech-2 that is operated by the dealer. Then a new key and transponder need to be bought and programmed to the car.

Change your keys regularly to prevent one from wearing out faster than the next. This will keep your keys in perfect condition.

Replacement Case

The new key fobs are not like the older Saab keys. They have electronics that make it difficult to copy. That has made car theft a lot more difficult than it was twenty years ago. However, it also has made the replacement of lost keys a more expensive task.

Every owner of a Saab 9-3 must have at least two functioning keys. If one of them is lost, it costs a lot to get another one for the car, as it requires replacing the CIM module, and then reprogramming the locking cylinders. Dealers charge between $100 and $200 for this.

There are ways to reduce these costly costs. Some parts dealers will search for the code on an extra key (usually the same one that opens the doors and turns on the ignition) and cut a new key blade out of metal for only a fraction of the dealer's cost. The key must be exactly the same as the original to allow it to work in your vehicle.

You can also replace the case yourself by following these steps. You'll require an flathead screwdriver and patience. With the screwdriver, break off the plastic and then remove the emergency key. Once the case is open, remove the electronic components and put them back into the new case. Place the key with the correct badge into the case.

Replacement Battery

The saab 9-3 replacement key 9-3 replacement battery is an inexpensive part that can be quickly and easily replaced. The YouTube video of Cyclone Cyd demonstrates how to get a saab replacement key to replace the remote fob battery with just four simple steps. This tutorial can be used for any modern-day saab car keys key fob though the process may vary slightly.

The button is normally located next to the Saab logo on the back of the fob. It's usually just below the saab replacement key programming logo on the back of the fob. Use a flathead to insert the screwdriver in the small hole in this button. This should be sufficient to open the fob case in order to change the battery.

After the new battery CR1632 is installed, you can reassemble the remote key fob and program it to your car. The entire process should take no more than an hour or less. It is a very simple procedure that doesn't require any special tools.

If you lose a key, the procedure will be somewhat more complex, but it can still be completed. The dealer must read the car's VIN and then request a replacement key blade and TWICE module that has the correct unique code. After that, they will have to cut the replacement key and then program it using an innovative software tool called MDI.

Replacement Key Fob

The key fob contains an internal battery that is used to lock and unlock your car. The batteries are able to last for that is a long time, and they eventually go out of service. This is a regular issue that affects all cars and the good thing is that you can change the batteries on most key fobs and not have to replace the whole case. Amazon sells replacement fobs that already have all the electronics in place. It is easy to remove the case and replace the batteries. You will need to remove the emergency key before you can replace the batteries. To do this, insert a small flathead screwsdriver into the slot that is in the middle. The case should split when you work the screwdriver all around it.

If you're ready to change your keys, have an extra set on hand. This can save you a lot of money. If you have a spare, you can have the dealer cut a new key and program it to your car, which is cheaper than replacing the entire key fob.

If you do not have a spare key, it is possible to add another key to your car, however this requires a lot of research and effort. It costs a few hundred bucks to add an additional car key. The computer in the vehicle must also be programmed. This can be done by a professional, but it is an expensive option for the majority of owners.

Replacement Ignition

As opposed to the earlier saab Car Keys cars, the modern SAAB 9-3 models feature a much more sophisticated alarm system that is dependent on a coded keys. This means that in the event that you lose your only working key, acquiring another one could be very costly since the car needs to have a computer module installed, and it must also be specifically programmed to accept an extra key. Dealers can even charge hundreds of dollars to program an additional key in the event that they are unable to complete the task.

Dealers will charge you a premium to replace your car computer (also called the CIM or SAAB twice) in the event that you lose your only working key. Instead, we can reprogram the EEPROM of your current car computer, preparing it for a replacement key, which will save you more than 50% of what you'll pay at a dealership.

If you have owned a car like the SAAB 9-3 for quite a while and you're aware of the ignition keys are not very durable. If your ignition key is not functioning properly, you must consider replacing it. They can become extremely sticky and the buttons can fall off. It's not so difficult as it may seem to replace the ignition key. With the right tools, it can be done quickly.